Primeweld cut60 recommendations

Discussion forum for RazorWeld, Everlast, and all other plasma cutters.
Post Reply
Otto316
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Wed Aug 26, 2020 7:21 am

Primeweld cut60 recommendations

Post by Otto316 »

I was recently gifted a table but do not have a plasma yet. Is there a better alternative to this?
Screenshot_20230702_191646_Amazon Shopping.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Top
Otto316
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Wed Aug 26, 2020 7:21 am

Re: Primeweld cut60 recommendations

Post by Otto316 »

Or maybe I should say is there a better "low cost" alternative to this?
Top
AREA
3 Star Member
3 Star Member
Posts: 357
Joined: Thu Jul 19, 2012 3:36 am

Re: Primeweld cut60 recommendations

Post by AREA »

I think you would be better off with an Everlast machine than the PrimeWeld. They are a little bit more money but still far less than a Hypertherm.
DIY 2x2 table
Top
Post Reply

Return to “RazorWeld, Everlast, & All Other Plasma Cutters”