Clear Powder Coat

Learn and share patina finishing techniques, experiences, and product knowledge here.
Post Reply
wrathje
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Sun Jul 29, 2012 9:41 pm

Clear Powder Coat

Post by wrathje »

Can your products be powder coated via clear coat?
I'm currenty using semi gloss arcylic for my pieces but was wondering if clear powder coat will be able to do the same. Will the patina hold up to 400' ?
User avatar
steelfx
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 765
Joined: Sat Oct 10, 2009 12:09 am
Location: St. George, Utah
Contact:

Re: Clear Powder Coat

Post by steelfx »

Yes, Clear Powder-Coat over the patinas is just fine.

thanks,

Bill
wickedinhere
3.5 Star Member
3.5 Star Member
Posts: 749
Joined: Thu Jun 09, 2011 9:03 pm

Re: Clear Powder Coat

Post by wickedinhere »

I use clear powder coat over the fx copper all the time and it comes out great.
wrathje
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Sun Jul 29, 2012 9:41 pm

Re: Clear Powder Coat

Post by wrathje »

Awesome, thanks a bunch Bill & wicked.

Those pumps you got Bill are screaming my name, lol


Thanks again
User avatar
steelfx
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 765
Joined: Sat Oct 10, 2009 12:09 am
Location: St. George, Utah
Contact:

Re: Clear Powder Coat

Post by steelfx »

wrathje wrote:Awesome, thanks a bunch Bill & wicked.

Those pumps you got Bill are screaming my name, lol


Thanks again
I'll put your name on one of 'em... :)

Bill
skyecyn
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Sat Jul 12, 2014 5:29 am

Re: Clear Powder Coat

Post by skyecyn »

Would a clear powdercoat work for the dyes?
Redneck
3 Star Member
3 Star Member
Posts: 272
Joined: Sat Oct 06, 2012 7:16 pm

Re: Clear Powder Coat

Post by Redneck »

skyecyn wrote:Would a clear powdercoat work for the dyes?
Yes, we use clear powder over dyes all the time.
STEEL3470
2 Star Member
2 Star Member
Posts: 77
Joined: Mon Aug 22, 2011 2:56 pm

Re: Clear Powder Coat

Post by STEEL3470 »

I was just about to ask about the clear powder coating I just got all my supplies to build my powder oven, so will be trying it next week.
Post Reply

Return to “Patina Finishes”