CLASSIFIED SECTION NOT INTENDED FOR MANUFACTURERS

Buy and sell used plasma cutting and related equipment here.
Post Reply
User avatar
admin
Site Admin
Posts: 363
Joined: Thu Jul 03, 2008 5:12 pm
Location: Out In The Shop
Contact:

CLASSIFIED SECTION NOT INTENDED FOR MANUFACTURERS

Post by admin »

The classified section was designed for PlasmaSpider members to buy and sell used equipment and was not intended as a place for manufacturers to advertise their products and services.

Manufacturers, please send me a PM to obtain our advertising rates and please reserve the classified section for our members to use.

Thanks for your co-operation.
tm america
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Sat Feb 23, 2013 12:24 am

Re: CLASSIFIED SECTION NOT INTENDED FOR MANUFACTURERS

Post by tm america »

Is the new plasma cutting products the place where manufacturers should post info on the items they make?Or is there somewhere else they should be posted instead?
m79b01
2.5 Star Member
2.5 Star Member
Posts: 212
Joined: Sun Dec 01, 2013 1:29 pm

Re: CLASSIFIED SECTION NOT INTENDED FOR MANUFACTURERS

Post by m79b01 »

Is the new plasma cutting products the place where manufacturers should post info on the items they make?Or is there somewhere else they should be posted instead?
Please read the following and be part of keeping this site going!
Manufacturers, please visit this link http://www.plasmaspider.com/advertising.php to review our advertising rates and reserve the classified section for our members to use.

Thanks for your co-operation.
Precision Plama LLC SDB 5x10
CandCNC
Hypertherm 65
Mach3
SheetCAM
the GIMP
inkscape
QCAD
https://www.facebook.com/burtonskustom
Post Reply

Return to “Classified Ads”