file converting help

[jrmay]

I'm struggling to get this file to convert into a dxf and into design edge. Any help is appreciated

IMG_4447.JPG

[adbuch]

What have you achieved so far? Are you trying to use the Design Edge auto trace tool, or are you using another program like Inkscape of CorelDraw?
David

[adbuch]

auto trace truck 1.jpg

auto trace truck 2.jpg

auto trace truck 3.jpg

auto trace truck 4.jpg

[adbuch]

auto trace truck 5.jpg

auto trace truck 6.jpg

[adbuch]

auto trace truck 7.jpg

auto trace truck 8.jpg

auto trace truck 9.jpg

[adbuch]

Danger Ranger partial trace.pcm image.jpg

Danger Ranger partial trace.pcm

[jrmay]

All I've gotten to is just the basic importing editing of a photo on design edge. Thanks for the pointers!

[adbuch]

All I've gotten to is just the basic importing editing of a photo on design edge. Thanks for the pointers!

So you do have the Advanced Design upgrade for Design Edge if you can import photos (jpeg, etc.). What size to you plan to cut this at? How much of the details do you want to cut into your part?

David

[adbuch]

Here is how I would start out using Design Edge to auto trace your photo.
David

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

6.jpg

7.jpg

8.jpg

[adbuch]

9.jpg

10.jpg

Follow the steps shown above and let us know how far you get - show us your partial result and ask if you have questions.
David

[jrmay]

Thanks for all the help! I appreciate it!

[adbuch]

Thanks for all the help! I appreciate it!

[adbuch]

You might take a look at this file for some ideas on how to format your interior features. Some great ideas on wheel treatment, interior body lines, etc.
David

viewtopic.php?p=239885#p239885

vw bus.jpg