Hi, i’m having issues with my xpr300 plasma cutting machine…… sometimes when i turned on in the morning it shows me a sign just like the picture attached and i dont know what to do. Usually i turned off and on a few times and the problem solves it self, im looking for a permanente solution for this problem. Maybe you can help me.
Thanks
Starting issues
-
Mayle1994
- 1/2 Star Member
- Posts: 6
- Joined: Thu Sep 05, 2024 9:17 am
Starting issues
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
weldguy
- 4.5 Star Elite Contributing Member
- Posts: 2168
- Joined: Fri Apr 17, 2009 11:48 am
Re: Starting issues
Check your ethercat cable for damage at the plugs/sockets or along the cable itself. Also I would have a look at the diagram below and follow the instructions to avoid electrical noise problems.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
