Problem with LinuxCNC PlasmaC
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8131
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Problem with LinuxCNC PlasmaC
Today I wanted to create a new G-code to cut 2 small parts, odd problem. The post processor LinuxCNC PlasmaC will not work, I used it just yesterday. I can switch to LinuxCNC THC and that works ( cannot use it as I am using QTPlasamC GUI). This is the error I get when trying to do the post process. I am using the newest release 7.1.35 TNG Development. Google has older problems but nothing recent.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 5 Star Elite Contributing Member
- Posts: 2713
- Joined: Thu Jul 24, 2008 11:15 am
Re: Problem with LinuxCNC PlasmaC
YIKES! Way out of my realm. Hopefully Les will see this and know whats going on. Good luck Tom.
-
- 4 Star Elite Contributing Member
- Posts: 1499
- Joined: Tue Feb 28, 2012 6:47 pm
Re: Problem with LinuxCNC PlasmaC
Its the POST code causing an error. Complaning about an OPERATION and tool . Its being generated by the POST function "DynamicCast" Not sure what htat function does but is unique to THAT POST. Its returning a string (or should be)
The trigger line is 219
Do not understand the Operationwithroundtool on a plasma cut?
The trigger line is 219
Do not understand the Operationwithroundtool on a plasma cut?
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8131
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Problem with LinuxCNC PlasmaC
Agreed this is what I found in the Post Processor, unknown why
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8131
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Problem with LinuxCNC PlasmaC
I uninstalled and reinstalled SheetCam and it is now working like it should, I guess the post processor got corrupted somehow.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 5 Star Elite Contributing Member
- Posts: 2713
- Joined: Thu Jul 24, 2008 11:15 am
Re: Problem with LinuxCNC PlasmaC
Awesome news Tom. Certainly would be nice to know what caused that though.