Collection
-
- 2.5 Star Member
- Posts: 121
- Joined: Mon Aug 16, 2021 5:12 am
Collection
A couple that didn't make the grade but I can show them off
Mick
Owner/ operator
MJT rural Contracting
Weldclass t1200
Hypertherm Pwermax 45XP
Owner/ operator
MJT rural Contracting
Weldclass t1200
Hypertherm Pwermax 45XP
-
- 5 Star Elite Contributing Member
- Posts: 2713
- Joined: Thu Jul 24, 2008 11:15 am
Re: Collection
Nice! Looks pretty good from here
- ROKCRLER
- 3 Star Elite Contributing Member
- Posts: 646
- Joined: Sun Sep 30, 2018 5:19 pm
Re: Collection
I find that the ones that dont make the grade and end up on the shop wall attract attention for new sales and requests.
Those look good to me too!
Those look good to me too!
4x8 Dynatorch
PM85
~Mo~
PM85
~Mo~
-
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Collection
I recognize some of them. Nice looking bunch!
David
David
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3428
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Collection
Always try to PAINT the displays. They stand out better, look better, and they let the customer know that they are not limited to raw metal. Clean them with some paint thinner. Hit them with Rustoleum rusty metal primer, and a coat of colorful spray paint.
Joe
.
Joe
.
Plasma:
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
-
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Collection
I like the Rustoleum brand for spray paint cans, and in particular the hammered finish - which comes in several colors. I have also used the 2 step process of dipping in acid and then spraying with hydrogen peroxide to really give the piece that colorful rusted look. After dry, I have sometimes sprayed with satin clear.
David
David
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3428
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Collection
I am most famous for my "Memory Finish." I cut the piece, and forget to bring it inside. Then it rusts in the rain.
Joe
.
Joe
.
Plasma:
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
-
- 2.5 Star Member
- Posts: 121
- Joined: Mon Aug 16, 2021 5:12 am
Re: Collection
these are ones that were discarded until I started a big clean up.
A lot of my painted ones go straight up on my FB page
A lot of my painted ones go straight up on my FB page
Mick
Owner/ operator
MJT rural Contracting
Weldclass t1200
Hypertherm Pwermax 45XP
Owner/ operator
MJT rural Contracting
Weldclass t1200
Hypertherm Pwermax 45XP
-
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Collection
ruralfencer wrote: ↑Fri Jun 03, 2022 7:58 am these are ones that were discarded until I started a big clean up.
A lot of my painted ones go straight up on my FB page
-
- 1.5 Star Member
- Posts: 34
- Joined: Fri Feb 11, 2022 10:45 pm
Re: Collection
I spy an HQ Holden! Don't see them cut out very often...if at all! I'm in NZ and have an HQ Premier. Any chance of getting that file? Happy to pay if need be.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3428
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Collection
I don't think that is a Holden. I think it is a Ford Mustang. As I look at photos of the Holden, you may be RIGHT!
However, if you have a photo of a car you like, send it to me, and I will get around to creating the .dxf cut file for you, as time, and energy allow. No charge. I do this for fun.
Joe
.
Plasma:
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
-
- 2.5 Star Member
- Posts: 121
- Joined: Mon Aug 16, 2021 5:12 am
Re: Collection
Definitely a HQ i did drew for another bloke
Mick
Owner/ operator
MJT rural Contracting
Weldclass t1200
Hypertherm Pwermax 45XP
Owner/ operator
MJT rural Contracting
Weldclass t1200
Hypertherm Pwermax 45XP
-
- 2.5 Star Member
- Posts: 121
- Joined: Mon Aug 16, 2021 5:12 am
Re: Collection
check your private messages
Mick
Owner/ operator
MJT rural Contracting
Weldclass t1200
Hypertherm Pwermax 45XP
Owner/ operator
MJT rural Contracting
Weldclass t1200
Hypertherm Pwermax 45XP
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3428
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Collection
Now that I see the photos, I do see that you did a great job with the illustration. I never heard of that car before this post.
Joe
.
Plasma:
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
-
- 2.5 Star Member
- Posts: 121
- Joined: Mon Aug 16, 2021 5:12 am
Re: Collection
It's an Aussie Classic built by General Motors Holden
Mick
Owner/ operator
MJT rural Contracting
Weldclass t1200
Hypertherm Pwermax 45XP
Owner/ operator
MJT rural Contracting
Weldclass t1200
Hypertherm Pwermax 45XP
-
- 1.5 Star Member
- Posts: 34
- Joined: Fri Feb 11, 2022 10:45 pm
Re: Collection
That is a very kind offer, thank you. My father just built a tribute to a famous American hot rod so I may see if you would do that car for me at some stage so I can surprise him with it.Joe Jones wrote: ↑Fri Jun 03, 2022 9:48 amI don't think that is a Holden. I think it is a Ford Mustang. As I look at photos of the Holden, you may be RIGHT!
However, if you have a photo of a car you like, send it to me, and I will get around to creating the .dxf cut file for you, as time, and energy allow. No charge. I do this for fun.
Joe
.
-
- 1.5 Star Member
- Posts: 34
- Joined: Fri Feb 11, 2022 10:45 pm
Re: Collection
Thank you very much!