Anyone have one of these units or used one, what if any are the issues or problems with this cutter. ,?
Thanks
Primeweld cut50dp user reviews
-
- 1/2 Star Member
- Posts: 2
- Joined: Sun Sep 12, 2021 4:56 pm
-
- 1/2 Star Member
- Posts: 2
- Joined: Sun Sep 12, 2021 4:56 pm
Re: Primeweld cut50fp
My mistake......should be. Primeweld cut50dp.
-
- 6 Star Elite Contributing Member
- Posts: 9854
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Primeweld cut50fp
You might find some information at the Langmuir forum. Here is the link. The one linked to is talking about the Primeweld 60, but do a search on that forum and you might find some info.
David
https://forum.langmuirsystems.com/t/any ... ld-60/4724
David
https://forum.langmuirsystems.com/t/any ... ld-60/4724
-
- 1/2 Star Member
- Posts: 4
- Joined: Fri Dec 25, 2020 6:28 pm
Re: Primeweld cut50fp
Ok,. Thanks