Looking for a Torchmate User near Milwaukee, WI

Torchmates software related questions and tips can be posted here
Post Reply
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1688
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Looking for a Torchmate User near Milwaukee, WI

Post by tnbndr »

A buddy of mine purchased a used Torchmate 4x4 and has no CAD experience or CAM but is a very intelligent person. He has asked me to look at his setup and get him started. I am completely swamped with work and I don't have time to watch videos, etc to learn Torchmate system.
Anyway if anyone is near Milwaukee, WI that would be willing to spend some time with him I am sure he would be generous.

Contact me via PM and I will put you in touch.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
Post Reply

Return to “Torchmate Software”