I got a question .Im using a wireless key board is there a function that I can use to fire the torch
to keep me from going to mach 3 and firing it from there.And if there is any other functions that I can use. thanks in advance.
Key board shortcut to fire the torch
-
- 2.5 Star Member
- Posts: 163
- Joined: Fri Feb 10, 2017 4:01 pm
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8132
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: key board
If you are using Mach 3 you can hit the F5key for on/off
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2.5 Star Member
- Posts: 163
- Joined: Fri Feb 10, 2017 4:01 pm
Re: key board
thanks thats a big help.
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 2021
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: key board
You can download the screen editor and add/change keyboard shortcuts for any of the buttons on the screen.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)