Easyscriber sheetcam settings Help...

All topics related specifically to the EasyScriber drag style scribe & engraving tool.
Post Reply
Axlworks
1/2 Star Member
1/2 Star Member
Posts: 8
Joined: Sat Apr 07, 2018 12:11 am

Easyscriber sheetcam settings Help...

Post by Axlworks »

My scriber is dragging from letter to letter. How do I get my Z to come up in between scribes? Thanks guys!

I’m using sheetcam / Mach 3 and a touch off plasma system.
User avatar
WyoGreen
4 Star Member
4 Star Member
Posts: 897
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: easyscriber sheetcam settings Help...

Post by WyoGreen »

Check your setting in Sheetcam--> Job Options--> Rapid clearance. You may need to increase this to a larger value, especially if your scribe is spring loaded.

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
User avatar
EasyScriber
2.5 Star Member
2.5 Star Member
Posts: 174
Joined: Thu Dec 13, 2018 2:13 pm
Contact:

Re: Easyscriber sheetcam settings Help...

Post by EasyScriber »

Axlworks wrote: Tue May 21, 2019 5:07 pm My scriber is dragging from letter to letter. How do I get my Z to come up in between scribes? Thanks guys!

I’m using sheetcam / Mach 3 and a touch off plasma system.
Check out this topic viewtopic.php?f=172&t=28847 and post any questions :Like
Post Reply

Return to “EasyScriber Drag Style Scriber for Hypertherm”