Question on plasma cutter amps
-
- 1.5 Star Member
- Posts: 31
- Joined: Wed Apr 12, 2017 10:25 am
Question on plasma cutter amps
When you choose the 45 amp setting for a cut does the program change the amps from 65 to 45, or do you need to do it manually, I am using a Hyperthermia 65
-
- 3 Star Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: Question on plasma cutter amps
Unless you are using CandCNC's systems HyT option and the RS485 remote option in the PM65, you have to change it manually.
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 1.5 Star Member
- Posts: 31
- Joined: Wed Apr 12, 2017 10:25 am
Re: Question on plasma cutter amps
Will it show a change on the digital read out on the plasma?
-
- 4 Star Elite Contributing Member
- Posts: 1499
- Joined: Tue Feb 28, 2012 6:47 pm
Re: Question on plasma cutter amps
Only of you have th Hyt_Connect options (RS485 on your plasma and in CommandCNC.Othog wrote:Will it show a change on the digital read out on the plasma?