Applying metal dyes

Learn and share patina finishing techniques, experiences, and product knowledge here.
Post Reply
woodworker2001
1.5 Star Member
1.5 Star Member
Posts: 25
Joined: Fri Nov 04, 2016 1:57 pm

Applying metal dyes

Post by woodworker2001 »

Looking to try out some dyes and Latin as on some projects. Have a question before taking the plunge.

1. Are there any other affective methods to apply the dyes other than with an air brush?

Thanks
Dan
Redneck
3 Star Member
3 Star Member
Posts: 272
Joined: Sat Oct 06, 2012 7:16 pm

Re: Applying metal dyes

Post by Redneck »

Spend $20 and get an air brush from Harbor Freight........ they are good enough to get you started. I'm still using mine after 3-4 yrs. :)
woodworker2001
1.5 Star Member
1.5 Star Member
Posts: 25
Joined: Fri Nov 04, 2016 1:57 pm

Re: Applying metal dyes

Post by woodworker2001 »

Thanks for the reply. What about larger areas?
Countrylane
2.5 Star Member
2.5 Star Member
Posts: 181
Joined: Wed Jan 20, 2010 6:55 pm
Location: Canada

Re: Applying metal dyes

Post by Countrylane »

I tried brushing and sponging the dyes on. Nothing worked until I bought an airbrush. Takes abit of practice but it doesn't take long to learn. I love airbrushing!
woodworker2001
1.5 Star Member
1.5 Star Member
Posts: 25
Joined: Fri Nov 04, 2016 1:57 pm

Re: Applying metal dyes

Post by woodworker2001 »

I am looking at dying some flags that I am making... they are about 18"x24". Is an airbrush sufficient to cover these?

With the harbor freight airbrush, what compressor are you using? Is it possible to use a small pancake compressor?

Thanks
Dan
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1461
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Applying metal dyes

Post by little blue choo »

Any compressor will operate a airbrush. I have mine plumbed into the air supply for my table. That way I am using air that has been filtered and dried. Just add a regulator so you can cut down the pressure and you're ready to go.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Post Reply

Return to “Patina Finishes”