Torchmate Plate marker
-
- 2 Star Member
- Posts: 88
- Joined: Mon Jul 14, 2014 9:37 pm
Torchmate Plate marker
I am curious if its worth buying the torchmate plate marker or is it better to go a different route? I have a torchmate 5x10, I am also very close to the factory here in reno. I am not sure how the aftermarket products interface other than all your doing is commanding a tool to come on and perform its task that the software has instructed it to do.
-
- 1.5 Star Member
- Posts: 42
- Joined: Sun Jan 24, 2016 2:22 pm
Re: Torchmate Plate marker
Do yourself a favor and build it yourself. Their plate marker is pretty expensive. It would be a turnkey option. You could build one yourself with a nice chicago pneumatic engraving pen (which is what they use) for around 4-500 bucks I would say. If you have a lot of time, you could do it fast. If you don't have time and a lot of money, I would say to buy it.
-
- 2 Star Member
- Posts: 88
- Joined: Mon Jul 14, 2014 9:37 pm
Re: Torchmate Plate marker
Okay Thanks.