Torchmate 2x2 Value
-
- 2 Star Member
- Posts: 88
- Joined: Mon May 11, 2015 6:20 am
Torchmate 2x2 Value
What do you think i could sell my 2x2 torchmate for with lincoln tomahawk 625 with machine torch and like new hand torch. No height control
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Torchmate 2x2 Value
The 2 x 2 Torchmate originally sold for about $3k. The Tomahawk 625 retailed for about $2200. The used price will vary depending on any upgrades (water table, downdraft table?), software, and general condition as well as age. A wild guess is somewhere in the range of $2400 to $3400 for everything.
The 2 x 2 tables have limitations with cut speed, cut height, etc. The Tomahawk is better for hand cutting as duty cycle is limited for cnc cutting (my experience) and cut quality has no comparison to the other premium priced plasma's. Still a good starter machine if a 2 x 2 cutting area is adequate. Jim Colt
The 2 x 2 tables have limitations with cut speed, cut height, etc. The Tomahawk is better for hand cutting as duty cycle is limited for cnc cutting (my experience) and cut quality has no comparison to the other premium priced plasma's. Still a good starter machine if a 2 x 2 cutting area is adequate. Jim Colt
-
- 2 Star Member
- Posts: 88
- Joined: Mon May 11, 2015 6:20 am
Re: Torchmate 2x2 Value
Thanks Jim I was thinking like $3000/$3500range. It does have the water table and also I have both machine and Hand torch for the plasma.