Torchmate guys please help In the middle of cutting a part the torchmate changes the Y0 Coordinate its off by 3 inches or so it's done it several times and its getting really frustrating cuts through the middle of the part!!!!
Any help Thanks in advance
Torchmate Loosing Y0 Coordinate
-
kd7bpk
- 1.5 Star Member
- Posts: 25
- Joined: Wed Jan 29, 2014 6:01 pm
-
madracing007
- 1/2 Star Member
- Posts: 4
- Joined: Sat Oct 18, 2014 7:00 pm
Re: Torchmate Loosing Y0 Coordinate
what control box are you running? mine does that sometimes and have it narrowed down to a loose connection from the computer cable in to the box
