I had a customer request a 15 foot gate with turkey scenes.
I used some of the images I bought from Jason for the scenes.
I played with them a little to fit them in and changed the grass a little.
He wanted it backed with cattle panel to keep is critters in.
I used 1-1/2 inch square tubing with many coats of black paint.
Just wanted to share.
Thanks.
Turkey Gate
- elkriverfab
- 3 Star Elite Contributing Member
- Posts: 489
- Joined: Mon Jul 27, 2009 4:49 pm
- AnotherDano
- 4 Star Member
- Posts: 802
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: Turkey Gate
That's a fine looking piece of work. And thanks for sharing.
You'll be able to point to that gate for years thinking; I did that.
Better yet, point to it with a potential customer next to you!
Dano
You'll be able to point to that gate for years thinking; I did that.
Better yet, point to it with a potential customer next to you!
Dano
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
- elkriverfab
- 3 Star Elite Contributing Member
- Posts: 489
- Joined: Mon Jul 27, 2009 4:49 pm
Re: Turkey Gate
Thanks Dano!
I am going to have him send me some photos of it after he installs it.
He drove more than 125 miles to pick it up from me.
But I guess I could show the photos
I am going to have him send me some photos of it after he installs it.
He drove more than 125 miles to pick it up from me.
But I guess I could show the photos
"OK, Now hold my beer and I'll try it"