Torchmate cad/cam
I have heard by switching the x axis on my motors then my letters wont cut backwards and the clean cut will be the front of signs as opposed to worrying about clean up so much on the fronts. Can anyone walk me through the procedure? Configuration? Thanks for any help given.
Switching the x axis
-
- 2 Star Member
- Posts: 62
- Joined: Fri Oct 31, 2014 2:04 pm
Switching the x axis
Homebuilt 2x4 water table
Torchmatecad
Flashcut THC
Hypotherm 45
Torchmatecad
Flashcut THC
Hypotherm 45
- Gamelord
- 4.5 Star Member
- Posts: 1636
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Switching the x axis
I am not at my machine but the setting is in your torchmate software. I believe under configuration. You should be able to see the motors and how they are configured. I think you change it from either positive to negative or clockwise to counterclockwise.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
-
- 2 Star Member
- Posts: 62
- Joined: Fri Oct 31, 2014 2:04 pm