I am making a few bow & arrow holders to donate to the boy scouts and would like to dress it up a little. I was wondering if anybody had anything simple that I can put into the corners like a shelf mount to fancy it up. Right now its just a "T" with some pegs that come off of it. I will post some pictures when I get them done.
Boy Scouts Archery design
- Metal Troll
- 2 Star Member
- Posts: 82
- Joined: Wed Sep 23, 2009 12:06 pm
- Location: Phoenix Arizona
-
- 2.5 Star Elite Contributing Member
- Posts: 125
- Joined: Sat May 30, 2009 5:12 pm
- Location: Saint Louis, Missouri U.S.A.
Re: Boy Scouts Archery design
Maybe too much detail for the size but it's an idea.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Metal Troll
- 2 Star Member
- Posts: 82
- Joined: Wed Sep 23, 2009 12:06 pm
- Location: Phoenix Arizona
Re: Boy Scouts Archery design
It is to small for the amount of detail but very cool I may scale it up so it would come out nice but it might get to big.
- Metal Troll
- 2 Star Member
- Posts: 82
- Joined: Wed Sep 23, 2009 12:06 pm
- Location: Phoenix Arizona
Re: Boy Scouts Archery design
For some reason this doesnt want to burn out it hopped around and put all the pierce points in and cut a crazy line across a bunch of my parts (Lucky i pulled the parts as they burned so i didnt lose anything) not sure what what the problem is my program reads it fine and all the lines look good but when i send it to my table insanity takes over. A have a feeling its my SDS program and it doesnt like cool stuff so it punishes me but if anybody has any ideas why it might do this please let me know.
Thanks
P.S. I was wondering if i can take a low resolution video of what the machine is doing and post it. I havent just because i have never seen anything like that on this site and i dont want to over step any bounds. I only ask because I dont know if i explain things the way they should be and if I can see something as it happens it helps me.
Thanks
P.S. I was wondering if i can take a low resolution video of what the machine is doing and post it. I havent just because i have never seen anything like that on this site and i dont want to over step any bounds. I only ask because I dont know if i explain things the way they should be and if I can see something as it happens it helps me.
-
- 2 Star Member
- Posts: 66
- Joined: Wed Sep 30, 2009 12:53 pm
- Location: Monticello Ar.
Re: Boy Scouts Archery design
If you look close there are small lines in drawing zoom in and delete those lines
MetalMan
MetalMan
-
- 2.5 Star Elite Contributing Member
- Posts: 125
- Joined: Sat May 30, 2009 5:12 pm
- Location: Saint Louis, Missouri U.S.A.
Re: Boy Scouts Archery design
Sorry guys, I had removed some detail to make it work for the brace. Some junk must have been left behind. Here it is cleaned up (the best I can tell) and the full project I made, that it came from.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by MQUICK on Thu Mar 11, 2010 2:38 pm, edited 1 time in total.
- Metal Troll
- 2 Star Member
- Posts: 82
- Joined: Wed Sep 23, 2009 12:06 pm
- Location: Phoenix Arizona
Re: Boy Scouts Archery design
Yeah I saw all the little lines and got rid of them and was stilling having problems I really think its my software that is doing it to me. I decided to go a different route with it just because no matter what i tried it just wouldnt work for me I believe because of the size. I have attached a dxf of what I finally decided to use.
I cant open up pcm files my software can only read dxf but once again thank you very much I will still use it but I think that I am going to scale it up to make a large wall hanging for them and maybe do some heat treating to it to fancy it up.
I cant open up pcm files my software can only read dxf but once again thank you very much I will still use it but I think that I am going to scale it up to make a large wall hanging for them and maybe do some heat treating to it to fancy it up.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here