Recently built a new shop and built a dedicated room for the plasma table, but its in a different orientation than before. Zero position of the table has changed. X axis is long axis, and the left / right arrows control its jog, however they are reversed, so that left arrow moves the gantry right, and right arrow moves it left, but the DRO reads correctly. Changing the polarity makes the keys right, but the DRO is then reversed (goes down from zero rather than up).
Can someone please help on how to change? Thanks
Reversing arrow key function
-
Gamelord
- 4.5 Star Member
- Posts: 1636
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Reversing arrow key function
switch the wires on your motors?
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
