I have a PlasmaCAM DHC2. I am cutting with a Miller Spectrum 375. What I am looking for is a complete configurations listing for different metal thickness. The Spectrum 375 is a new cutting machine for me. I had helped a friend whth his machine before buying mine. He was using a Hypertherm 600. What I would like if possible is the configurations for 16, 18, 20 gauge cold rolled steel. Below I have made a list of the settings I need.
Cutting speed (ipm):
Cutting height ( inch):
Height for rapid travel (inch):
Height for pierce (inch):
Time spent piercing hole (sec):
Continue cutting after stop (sec):
Z shift (inch):
Arc voltage shift (inch):
Material thickness (ga): 16, 18, 20.
Thank you for your time. Any help you could give me would be appreciated.
bmwgil
Miller Spectrum 375 Configurations
-
- 1/2 Star Member
- Posts: 4
- Joined: Tue Sep 15, 2009 1:40 pm
-
- 1/2 Star Member
- Posts: 4
- Joined: Sat Jan 14, 2017 6:33 am
Re: Miller Spectrum 375 Configurations
did you ever get any settings