For me, A Axis is my 2 sensors on the torch mount for if your tip Fuses to the plate or hit something. One of them was tripping randomly, so I backed it off a bit and it helped.
I will try those other cad programs and see if it helps out. I think it's just some settings i messed up when I tried to troubleshoot my initial problem though.
Command CNC torch height jumps UP
-
- 1 Star Member
- Posts: 15
- Joined: Sun Sep 08, 2024 7:52 pm
-
- 4 Star Elite Contributing Member
- Posts: 1499
- Joined: Tue Feb 28, 2012 6:47 pm
Re: Command CNC torch height jumps UP
The "Configurator" program where you make changes to things like motor tuning and THC settings has a feature that lets you create a COPY of a running Config and then you can run that and make chnges without going down the rabbit hole. Its advised to mess with a copy and leave the main alone . If you find the new one works better you can delete the older one. You can have as many CONFIGS as you want
You might also check in that same menu if there is a "template " from when the table was new . A template cannot be edited it can only be Coped to a new config
You might also check in that same menu if there is a "template " from when the table was new . A template cannot be edited it can only be Coped to a new config