Arch pool gate

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
Post Reply
User avatar
elkriverfab
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 489
Joined: Mon Jul 27, 2009 4:49 pm

Arch pool gate

Post by elkriverfab »

One of my customers sent me a photo of a gate I made for them a couple of months ago.

They had an event that allowed all of the neighbors to walk home to home and see how each home owner blends the natural foliage of the area with their landscaping.

They said they had a lot of compliments on their gates I built.

It's nice when a customer emails you back after months have gone by and say's thanks :D

Just thought I would share the picture of the gate installed.
Attachments
Pool gate.jpg
Pool gate.jpg (57.27 KiB) Viewed 1956 times
Pool gate.jpg
Pool gate.jpg (57.27 KiB) Viewed 1956 times
"OK, Now hold my beer and I'll try it"
User avatar
plasmajoe
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 675
Joined: Thu Jul 30, 2009 8:19 pm

Re: Arch pool gate

Post by plasmajoe »

Very nice arch door, elkriverfab. I like the location it was made for.

Plasma Joe
User avatar
elkriverfab
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 489
Joined: Mon Jul 27, 2009 4:49 pm

Re: Arch pool gate

Post by elkriverfab »

Thanks everybody for the complements on the gates! :D
"OK, Now hold my beer and I'll try it"
User avatar
Loyd
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 685
Joined: Tue Nov 03, 2009 12:28 am
Location: Bald Knob, AR
Contact:

Re: Arch pool gate

Post by Loyd »

Shawn, That is a fine job.
Loyd
De inimico non loquaris sed cogites
Do not wish ill upon your enemies, plan it.
Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”