OK, I know I may be too old for this but I had to do it!
I was at wally world and found this 4X4 rock crawler RC truck and first thing that came to mind was plasma cut parts!
So........ this was Sunday's project.
All the red parts are what I added to it.
Have to admit, for a cheap RC, it's pretty fun.
Full time locking differentials means off road fun!
If you get two of them, you can remove the front end off of one, put it on the other and do a little rewiring for 4 wheel steering.
Just thought I would share
RC rock crawler project
- elkriverfab
- 3 Star Elite Contributing Member
- Posts: 489
- Joined: Mon Jul 27, 2009 4:49 pm
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 828
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
- AnotherDano
- 4 Star Member
- Posts: 802
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
My apologies for cramming that wall hanging into your thread.
I just screwed up...............
Carry on, guys.
I just screwed up...............
Carry on, guys.
Last edited by AnotherDano on Thu Sep 02, 2010 11:24 pm, edited 1 time in total.
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
-
- 1 Star Member
- Posts: 17
- Joined: Wed Aug 04, 2010 8:51 pm
Re: RC rock crawler project
Nice work, I love the crawler !!
-
- 2.5 Star Elite Contributing Member
- Posts: 239
- Joined: Sun May 16, 2010 3:28 am