11 ga galvanized help

[kbenz]

I have a pm65. what settings should I use for galvanized 11ga?

thanks

[m79b01]

I would start at the same settings as 11ga maybe 10ga. That being said, I would likely NOT cut galvanized any more than needed. It is very toxic and unpleasant to boot. The coating, I would think, is not thick enough to affect cut much.

[jimcolt]

Steel settings will work perfectly. Make sure your fume control produces no smoke.

Jim Colt Hypertherm

I have a pm65. what settings should I use for galvanized 11ga?

thanks

[kbenz]

Thanks all