16 GA Galv settings perfection at last

[dolanski72]

These are what i come up with and it cuts with no slag. Just a quick grind and ready to weld.

Multicam 1000 table

Hypertherm Powermax 1000 G3
25 amps 220329 nozzle, 120926 electrode, 120979 deflector, 120925 swirl ring

80 psi, motor guard m-26 filter, ref air dryer

140 ipm feed rate, 100 pierce delay

[dolanski72]

Forgot to mention torch height... I used a dime to space it above the material