Hey let me know what you all think of this and what you might charge for something like this.
Its constucted from 1pc of 24ga cold rolled and it is 30" tall x 42" long x 2" deep. I bent then welded the corners and then ground them so it looks like a big hunk of steel. I also bent a flange on the back side so it looks like its floating a inch of the wall.
Some metal art for the office
- Metal Troll
- 2 Star Member
- Posts: 82
- Joined: Wed Sep 23, 2009 12:06 pm
- Location: Phoenix Arizona
Some metal art for the office
- Attachments
-
- Metal art profile.jpg (149.76 KiB) Viewed 2529 times
- Metal art profile.jpg (149.76 KiB) Viewed 2529 times
-
- Metal art.jpg (81.61 KiB) Viewed 2529 times
- Metal art.jpg (81.61 KiB) Viewed 2529 times
-
- 2 Star Member
- Posts: 58
- Joined: Fri Nov 28, 2008 1:13 am
- Location: Lehi, Utah
Re: Some metal art for the office
I far a booth at the sportsmans expo and the guy was selling them between 200 to 500 depending on the size and all but talk about amazing work he also incorporated cutouts In it as well. Anyways beautifully done.
-fitzy-
It ain't braggen if you can back it up!
It ain't braggen if you can back it up!
- Metal Troll
- 2 Star Member
- Posts: 82
- Joined: Wed Sep 23, 2009 12:06 pm
- Location: Phoenix Arizona
Re: Some metal art for the office
Thats kind of what i was thinking on pricing on this. I just wanted to confirm to make sure I wasnt crazy. I have done some with cut outs but i really wanted to show case the swirling and heat treatment. It gets a kind of overworked a little bit for my taste when you have cut outs, heat treating, and swirling all in the same piece. Thanks for letting me know the pricing and thank you for the compliment.
- AnotherDano
- 4 Star Member
- Posts: 802
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: Some metal art for the office
That's a fine piece of work, Metal Troll.
Be proud ($$$) of that one.
Be proud ($$$) of that one.
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday