Heavy Dross On Corners And Curves Only

[mark67inman]

Hello All

Ive been fighting this for 2 years and has decided to ask. All of my straight line cuts are almost Dross-Less with the factory settings from Hypertherm 45 Plasmacam with height control

My corners and curves though are always an issue which are heavy on dross, any help is greatly appreciated.

[kbenz]

your speed is usually slower in corners which will create more dross

[jimcolt]

You don't mention what cutting machine you are using. Corner dross is a result of slow speed.....with many machines you can increase corner speeds and or increase acceleration rates to minimize this issue.

Jim Colt Hypertherm

Hello All

Ive been fighting this for 2 years and has decided to ask. All of my straight line cuts are almost Dross-Less with the factory settings from Hypertherm 45 Plasmacam with height control

My corners and curves though are always an issue which are heavy on dross, any help is greatly appreciated.