Here are a couple of ones I made awhile ago. Kind of the wrong holiday but I think they are cool.
Skull and Jack
- Metal Troll
- 2 Star Member
- Posts: 82
- Joined: Wed Sep 23, 2009 12:06 pm
- Location: Phoenix Arizona
Skull and Jack
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3.5 Star Elite Contributing Member
- Posts: 689
- Joined: Fri Aug 15, 2008 6:22 pm
- Location: Tenino,WA
Re: Skull and Jack
Hi folks - I downloaded the cowboy skull to look at at cannot get a readable file. I use Corel X4 and I have had the same results with other files. It just shows up as a tiny irregular dot w/ lines coming out in areas. What was this file generated in??
plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
-
- 2.5 Star Member
- Posts: 148
- Joined: Fri Jan 15, 2010 7:32 pm
Re: Skull and Jack
Hi Bill,
I opened it in Cutting Shop with no problem. It's part geometry plus an offset toolpath with lead ins and outs.
I opened it in Cutting Shop with no problem. It's part geometry plus an offset toolpath with lead ins and outs.
- trucks1948
- 3 Star Elite Contributing Member
- Posts: 439
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
Re: Skull and Jack
Bill, i use corel x4 and it opened ok for me.It was quite small and off to the side,but once i enlarged it it looked ok.Jim
- Metal Troll
- 2 Star Member
- Posts: 82
- Joined: Wed Sep 23, 2009 12:06 pm
- Location: Phoenix Arizona
Re: Skull and Jack
I made these with Inkscape and Shop Data Systems and for some reason I always have some problems with the scaling of parts I export and import sorry for any inconvience.