4X4 Truck parts

Scott Briggs · Post by **Scott Briggs** » Mon Dec 03, 2012 7:49 pm

Where's all the crazy 4x4 junkies at? Does anyone have any cool suspension parts drawn up?

Gamelord · Post by **Gamelord** » Mon Dec 03, 2012 9:03 pm

Ya may want to check out Pirate4x4

Post by **IHscout** » Mon Dec 03, 2012 9:07 pm

What are you looking for? I just drew and burnt a sh@t load of link brackets for 60"s and 2.5 tons for my buddies. Plates for 8274's, plates for the standard warn winches.

I'm not on here very often, the quickest way to get ahold of me is either email or text. csfabworks@gamil.com or 1-636-744-5868. If I have it I'll give it to you.

Let me know.

Scott Briggs · Post by **Scott Briggs** » Tue Dec 04, 2012 9:51 am

I'm just trying to encourage everyone thats into 4x4 to talk about that stuff. Its just something that Im into. I like to see what others are doing.

Scott

coyote577 · Post by **coyote577** » Tue Dec 04, 2012 3:03 pm

A few hundred I just built a 86' toy crawler sas'd doubler so on.
goto http://www.texas4x4.org/burntables-134/ ... les-44119/ for more dxf files for 4x4 trucks.

Scott Briggs · Post by **Scott Briggs** » Tue Dec 04, 2012 5:08 pm

Sweet, thank you coyote.
Scott

Nacs Fab · Post by **Nacs Fab** » Wed Dec 05, 2012 9:51 am

I designed and drew up a leaf spring mount for a SAS on a 95 Ford Explorer and had it waterjet cut. It worked out real good. Now that I have my CNC Plasma, I'll make a bunch more of these eventually.

Have you downloaded the standard 4x4 offerings such as NP203 and NP205 adapters, disc brake caliper mounts and so on from Offroad Fab Net?

They have some good stuff for free there.

coyote577 · Post by **coyote577** » Wed Dec 05, 2012 12:09 pm

No I haven't I have a t-case mounting brackets and disc brake swap brackets for toyota and all kinds of tabs some armor and braces for diff's some 203 205 stuff and 14 bolt stuff and a little bit for tons.

coyote577 · Post by **coyote577** » Fri Dec 07, 2012 1:36 am

I got bored so I made some pole dancer beadlocks. They are not very practical, but it is a good exercise for making dxf files.
To make the weld on ring copy the outer ring and bolt holes then draw a inner ring about 2.5 inches smaller radius.

Scott Briggs · Post by **Scott Briggs** » Fri Dec 07, 2012 10:57 am

Haha, that's cool man!

Scott Briggs · Post by **Scott Briggs** » Fri Dec 07, 2012 11:02 am

I love off road stuff, but I'm still in the learning stages of trying to figure out how everything works. I'm capable of building anything, just not into the trial and error part when there is so much info out there these days. I have some really cool 3 and 4-link Ideas I will pass along when I get them drawn up.

Scott

coyote577 · Post by **coyote577** » Fri Dec 07, 2012 1:37 pm

Here is my baby, I've been welding for 20+ years just getting into cut tables and off-roading it seems that the two are meant for each other. I design and build a lot of equipment on autocad but drawing or converting into G-code is sometimes a challenge.

Scott Briggs · Post by **Scott Briggs** » Fri Dec 07, 2012 7:08 pm

A buddy and I sat in my office one evening and did a rough design on what we call a rock buggy body. It will be burned out of 14-16ga sheet metal. Some of it will be broke on my break press then all the pieces welded together. The plan is to build the structure strong enough that no internal roll cage would be necessary. This body could be used for almost any type of racing.

coyote577 · Post by **coyote577** » Fri Dec 07, 2012 9:09 pm

badass

coyote577 · Post by **coyote577** » Sat Dec 08, 2012 12:56 pm

This is for you np-203 fans.

Scott Briggs · Post by **Scott Briggs** » Thu Dec 13, 2012 5:14 pm

Here is my truck. I have a set of stacks and a light bar built for it, I just haven't had the time to put them on. This is what I'm wanting to build a nice custom 4-link suspension for.

truck.jpg

1_imagejpeg952.jpg

Binderman · Post by **Binderman** » Wed Dec 09, 2015 6:07 pm

IHscout wrote:What are you looking for? I just drew and burnt a sh@t load of link brackets for 60"s and 2.5 tons for my buddies. Plates for 8274's, plates for the standard warn winches.

I'm not on here very often, the quickest way to get ahold of me is either email or text. csfabworks@gamil.com or 1-636-744-5868. If I have it I'll give it to you.

Let me know.

I noticed your user name......... S2 or 80/800?? I have a 800A.

Anyone have a SAS file for a 89 S-10??

cbassjr · Post by **cbassjr** » Wed Dec 09, 2015 8:48 pm

I'm kinda a dumb ass so what does SAS mean.

c&hrodshop · Post by **c&hrodshop** » Wed Dec 09, 2015 11:12 pm

Solid axle swap

Post by **MIFab** » Thu Dec 17, 2015 7:56 pm

coyote577 Is the brake bracket for a 14 er what?

HorseN · Post by **HorseN** » Tue Dec 29, 2015 4:11 pm

portable winch mount .dxf

Binderman01 · Post by **Binderman01** » Mon Jan 04, 2016 9:03 pm

Does anyone have a link for the 203/205 adapter? I also found a 231/300 adapter the other day and can't find it now. Anyone have the links?

Post by **CW_Cutting12** » Tue Jun 04, 2024 7:55 pm

Can we Bump this page. There is some good stuff in here but i know there has t be more out there.

Post by **zakscott22** » Thu Jun 06, 2024 9:04 pm

i have some more for link tabs and what not, need to go thru and get them put together and ill share them

Post by **zakscott22** » Thu Jun 06, 2024 9:06 pm

Binderman01 wrote: ↑Mon Jan 04, 2016 9:03 pm Does anyone have a link for the 203/205 adapter? I also found a 231/300 adapter the other day and can't find it now. Anyone have the links?

Id be interested in the 231/300 if you find it

4X4 Truck parts

4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts

Re: 4X4 Truck parts