Newbie from Ocala florida
-
Vwmikey
- 1/2 Star Member
- Posts: 1
- Joined: Wed Oct 23, 2024 7:23 pm
Newbie from Ocala florida
Just wanted too say what's up. Going to learn to powder coat.
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3428
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Newbie from Ocala florida
You will enjoy it!
Joe
Joe
Plasma:
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Newbie from Ocala florida
Hi Vwmikey. I assume from your name that you are into VW's. Do you have a plasma table that you are using to cut the parts you want to powder coat?
If so, what kind of table do you have - and what software do you use to do your designs? There is a powder coating section of this forum that you may find useful.
viewforum.php?f=82
David
If so, what kind of table do you have - and what software do you use to do your designs? There is a powder coating section of this forum that you may find useful.
viewforum.php?f=82
David
