Hi, im trying to cut an entire plate using the common line with cnc xpr300 but the hole is not coming up in the middle of the plate.
Can you help me??? Why is this happening??
Cutting with common line
-
Mayle1994
- 1/2 Star Member
- Posts: 6
- Joined: Thu Sep 05, 2024 9:17 am
Cutting with common line
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 9854
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Cutting with common line
Please post your dxf file.
Thanks,
David
Thanks,
David
-
plasmanewbie
- 5 Star Elite Contributing Member
- Posts: 2713
- Joined: Thu Jul 24, 2008 11:15 am
Re: Cutting with common line
You could be losing some positioning if the file checks out ok. I used to run my rapids as fast as they would go and that got me into trouble with losing steps and being off position. Do you run your rapids really fast?
-
68rscamaro
- 1 Star Member
- Posts: 18
- Joined: Tue Jul 01, 2014 3:34 pm
- Location: Idaho Falls
Re: Cutting with common line
Lets see your dxf file
I'm guessing it's not offsetting for the kerf width correctly
I'm guessing it's not offsetting for the kerf width correctly
