Home built Table with Thermal Dynamics Cutmaster 52 $5000 Los Angeles area

[shaolincrane]

I separated from me and my fathers business and as such I don't have the room or ability to operate this anymore. I was planning on shipping it to Japan with me, but I have a line on a property there that fits very well for me. I really don't want to sell this but if I need to let this go to make it happen I will. I think $5000 for what's included is fair. I'll get the photos uploaded shortly. Located about 25min from downtown Los Angeles.

Roughly 38"x50" cutting area. Perfect for a small corner of your shop. Built on a very expensive tool cabinet from Graingers. This is a close match to it.
https://www.grainger.com/product/STRONG ... cher-5HZP2
Heat treated 25mmx22mm rack and pinion drive.
HGR-15 and HGR-25 Linear rails for high precision cuts
Water table
Stand alone controller with Torch Height Controller
High temperature cable chains
Shielded wiring harnesses
Thermal Dynamics Cutmaster 52 with CNC controller 60amp machine
SL100 Machine torch(new) SL60 hand torch with leather wrap
Many torch consumables, black and standard

[acourtjester]

It may help to know where it is located

[adbuch]

Also a few videos showing it running and cutting would probably go a long way towards a potential sale.
David

[shaolincrane]

Also a few videos showing it running and cutting would probably go a long way towards a potential sale.
David

I attempted to upload them but the site won't allow it.

[adbuch]

Also a few videos showing it running and cutting would probably go a long way towards a potential sale.
David

I attempted to upload them but the site won't allow it.

I expect you need to be a Contributing Member to upload your videos. You should be able to post them to either Youtube or Google Images and upload the links here.

David

[shaolincrane]

Also a few videos showing it running and cutting would probably go a long way towards a potential sale.
David

I attempted to upload them but the site won't allow it.

I expect you need to be a Contributing Member to upload your videos. You should be able to post them to either Youtube or Google Images and upload the links here.

David

I'll do that as soon as I get a chance.