Hello I am new here and I have a hypertherm HPR260xd
Running pheonix and I am getting a "failed ohmic tip sense" error whenever I cut #4 stainless I am trying to find the setting to change the stall force so it uses that instead of ohmic sense any help on where to look within the program would be appreciated
Ohmic vs stall force
-
weldguy
- 4.5 Star Elite Contributing Member
- Posts: 2168
- Joined: Fri Apr 17, 2009 11:48 am
Re: Ohmic vs stall force
This may help you
- Stall force.PNG (90.5 KiB) Viewed 657 times
- Stall force.PNG (90.5 KiB) Viewed 657 times
