2" X 42" belt grinder

[acourtjester]

Just finished new project 2" X 42" belt grinder, CNC plasma cut parts, HF sander 10 amp motor. Aluminum wheel from Amazon, powder coated in my DIY oven. Can be used in either horizontal or vertical positions, adjustable table. DXF files free to the asking.

[adbuch]

Tom - thanks sharing photos and information on your latest belt sander. I think this one turned out great. Is this a Jeremy Schmidt design or one of your own?

Good job!!

David

[acourtjester]

Mine, go the Idea from a YouTube video I think a Russian company. Made some simple drawings with the 4 wheel placements for the belt size and went from there. The aluminum wheels are the same I used on the Schmidt design grinder I have built in the past. The Russian one used a 4.5 Inch angle grinder for power I chose a 10 amp larger motor from HF. They have a sale on them for $29. now

[adbuch]

Mine, go the Idea from a YouTube video I think a Russian company. Made some simple drawings with the 4 wheel placements for the belt size and went from there. The aluminum wheels are the same I used on the Schmidt design grinder I have built in the past. The Russian one used a 4.5 Inch angle grinder for power I chose a 10 amp larger motor from HF.

Thanks for that Info!! I will check out Youtube to see if I can find it.

David

[acourtjester]

here you go

[adbuch]

here you go

Thanks Tom!!

David

[tinspark]

ingenious!

[05Duramax]

Impressive Tom!