Leash Holder (with paw prints)

[Russ K]

I always sell a few of these at craft sales. Plug welding the hooks on the surface with a nice bump like a rivet adds a layer of dimension...............Russ K.

rvsdgoforawalk.dxf

rvsdgoforawalk.pcm

[RClippa]

Thanks a lot. I think the local SPCA could turn these into cash to help the animals.

The center of the O will drop out though. I just added two tabs that hold them in.

[akpilot]

That's cool Thanks!!

[Chris Oreo]

Hi i just tried to cut this out but the leash holders cut out completely and then the cut could not be completed as there was no material, am i doing something wrong? thanks Chris

[adbuch]

Hi i just tried to cut this out but the leash holders cut out completely and then the cut could not be completed as there was no material, am i doing something wrong? thanks Chris

Hi Chris - see it this helps.
David

leash holder 2 versions.pcm

leash holder 2 versions.dxf

1.jpg

[Chris Oreo]

Thanks very much,I’ll give it another go,great item

[adbuch]

Thanks very much,I’ll give it another go,great item

Chris - let us know how it turns out.
David

[jmersereau]

Here is a remix of the design, it is now symmetrical and has an apostrophe. The two leash holders need to be bent out and up or bent in a semi circular curve (around a 3/4" wooden dowel) to hold the leashes.

Lets Go For A Walk.dxf

[05Duramax]

My wife would love one of these for the closet! Thanks guys, I think I will cut Jim's version for simplicity but they both look great!

[Searchman]

Thanks for the share

[OldNBroken]

Thanks for the drawing. Here's my version from it

leash hanger.jpg

[adbuch]

Thanks for the drawing. Here's my version from it

Very nicely done!! Looks great.
David

[DieselFumes]

Very nice! Looks pro, well done

[wallsworks]

Nice file! It came out great.

IMG_1600.png

[adbuch]

Great job wallworks! Thanks for showing us your finished project.
David

[plasmanewbie]

Looks great, thanks for posting.

[ShaneP]

Here is a remix of the design, it is now symmetrical and has an apostrophe. The two leash holders need to be bent out and up or bent in a semi circular curve (around a 3/4" wooden dowel) to hold the leashes.

Might be a dumb question, but I am cutting some bow holders and would prefer to do the rounded bend as opposed to two 90 degree bends. How are you all bending around a wooden dowel or piece of pipe?

[plasmanewbie]

I would bend those around a piece of pipe myself. Post a pic and or dxf of your bow holder if you get a chance.

[ShaneP]

I would bend those around a piece of pipe myself. Post a pic and or dxf of your bow holder if you get a chance.

I don't claim this as my own as I just traced the image my customer sent me and added the requested name. I believe this is available on etsy or maybe even here somewhere.

Michael Bow Holder.svg

[jmersereau]

I think that this is the design you are going for and you want the four bent supports to be nice curved loops.

Screenshot 2024-10-10 222004.jpg

[plasmanewbie]

I would bend those around a piece of pipe myself. Post a pic and or dxf of your bow holder if you get a chance.

I don't claim this as my own as I just traced the image my customer sent me and added the requested name. I believe this is available on etsy or maybe even here somewhere.

Awesome, thank you!

I think that this is the design you are going for and you want the four bent supports to be nice curved loops.

Screenshot 2024-10-10 222004.jpg

Yours looks awesome Jim! Very nicely done

[ShaneP]

I think that this is the design you are going for and you want the four bent supports to be nice curved loops.

Screenshot 2024-10-10 222004.jpg

This is the look I'm going for. I have a cheap brake and can make the 90, 45 degree bends and so forth, but I've never tried to do a circular bend around pipe or a wooden dowel. I was looking for some advice on the best way to accomplish this.

[adbuch]

This one and several others just like it for sale on Etsy.

Etsy bow rack.jpg

bend easy.jpg

[adbuch]

Just lay it on top of your bench, clamp a piece of pipe on top, and bend with your hand. The ones sold on Etsy are 16 ga. steel. If you use thicker, you can use a dead-blow hammer to work it around the pipe.

David

pipe bend.jpg

dead blow hammer.jpg

[ShaneP]

Thanks David! This was my initial thought, then I started overthinking it. Seeing you YouTube videos of people modifying their metal brakes to accomplish this made me doubt myself even more. As usual, I’m my own worst enemy and just need to remember to keep it simple.