Quick vid of a few projects from over the last little while. Not all directly plasma related but the plasma table plays a big role in a many of these projects around the shop.
Few projects not all plasma related
- sincityairfx
- 1 Star Member
- Posts: 18
- Joined: Mon Mar 25, 2024 5:45 pm
- Location: Las Vegas, NV
- Contact:
- SegoMan DeSigns
- 4 Star Member
- Posts: 952
- Joined: Sat Jan 06, 2018 4:45 pm
Re: Few projects not all plasma related
Nice Work, you have some skills.
- sincityairfx
- 1 Star Member
- Posts: 18
- Joined: Mon Mar 25, 2024 5:45 pm
- Location: Las Vegas, NV
- Contact:
Re: Few projects not all plasma related
Thanks Segoman, appreciate that
-
- 2.5 Star Elite Contributing Member
- Posts: 156
- Joined: Sun Jul 17, 2022 9:43 pm
Re: Few projects not all plasma related
eye catching stuff, nice work.
-
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Few projects not all plasma related
Impressive video! Thanks for sharing.
David
David
- sincityairfx
- 1 Star Member
- Posts: 18
- Joined: Mon Mar 25, 2024 5:45 pm
- Location: Las Vegas, NV
- Contact:
Re: Few projects not all plasma related
Thanks Marty and David, I appreciate it!
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1688
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Few projects not all plasma related
Those are some mad skills!!!
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com