Etsy DXF/SVG Download

[HCmillertech]

This is the first time I have tried this. I downloaded a file and opened it an it needs to be tweaked for sure. It is a Koozie holder I was wanting to put in the shop. It looks like it is all separate objects and I need some guidance on where to start and how to clean it up.

What file should I start with and then getting it to one object.

Attached is an image after Gcode

Thanks

Capture.PNG (12.13 KiB) Viewed 6486 times

Capture.PNG (12.13 KiB) Viewed 6486 times

[bryantar74]

did you get it worked out?

[HCmillertech]

No I was out of town and just getting back to it. I was hoping someone knew how to help me.

[ROKCRLER]

You have a bunch of disjoined segments/nodes.
Whipped this up for you to try..

Koozie Rack.svg

(3.17 KiB) Downloaded 96 times

Koozie Rack.svg

(3.17 KiB) Downloaded 96 times

Koozie Rack.dxf

(27 KiB) Downloaded 118 times

Koozie Rack.dxf

(27 KiB) Downloaded 118 times

[ROKCRLER]

40 downloads, anyone cut it yet?

[plasmanewbie]

I downloaded it just to check out your work MO but never cut it, I didn't even know what it was lol! Now i know....

koozieholder.PNG (352.23 KiB) Viewed 6079 times

koozieholder.PNG (352.23 KiB) Viewed 6079 times

[ROKCRLER]

I had intentions of putting up the 3d rendering but had an early senior moment..

[Fastyankee]

Rokcreler,
How did you clean up the DFX? Did you just go in and have to join the nodes with the node editing tool,
That's only way I have been able to fix this issue I get it a lot when using DFX files form Etsy and other sources.

[ROKCRLER]

Rokcreler,
How did you clean up the DFX? Did you just go in and have to join the nodes with the node editing tool,
That's only way I have been able to fix this issue I get it a lot when using DFX files form Etsy and other sources.

I redrew it, i think i tried to join all the issues but was easier to simply redraw.

[Fastyankee]

I can see that it was a very simple drawing.

[Hatchet]

Registered just to say thanks for the file. It cuts just fine and bends easily for those that asked.

[adbuch]

I can see that it was a very simple drawing.

I just tool a look at the original Etsy file and it's very simple and pretty quick to link/join the disjointed nodes.
David

[adbuch]

I can see that it was a very simple drawing.

If you are interested in learning how to draw this from scratch using the original posted image as a guide, here is one way to do it.
I have provided the actual svg file for this sequence, so you can follow along at each step to see what I have done. Let us know if you have any specific questions and/or comments.

David

Koozie holder drawing steps.svg

(194.84 KiB) Downloaded 11 times

Koozie holder drawing steps.svg

(194.84 KiB) Downloaded 11 times

[adbuch]

Registered just to say thanks for the file. It cuts just fine and bends easily for those that asked.

PXL_20240530_000528127~2.jpg
PXL_20240530_000517717~2.jpg
PXL_20240530_000511315~2.jpg
PXL_20240529_235154417.jpg

Nice job - I think it turned out great!
David