Some simple air tool racks cut from aluminum, finished, bent up, and in use. Love this stuff
Air tool racks cut and bent
- Deuling Design
- 1 Star Member
- Posts: 11
- Joined: Mon Apr 01, 2024 2:32 pm
-
- 5 Star Elite Contributing Member
- Posts: 2713
- Joined: Thu Jul 24, 2008 11:15 am
Re: Air tool racks cut and bent
Looks great, i’ve made a couple of those as well but don’t have a break so cut relief lines to bend them.
-
- 2 Star Member
- Posts: 77
- Joined: Wed Nov 15, 2023 6:44 pm
Re: Air tool racks cut and bent
Just a note here, I don't like to click on a posting only to have a video with loud music
set on auto run.
Just sayin'
set on auto run.
Just sayin'
-
- 3 Star Elite Contributing Member
- Posts: 304
- Joined: Wed Aug 24, 2022 2:48 pm
-
- 2 Star Member
- Posts: 78
- Joined: Tue Jul 22, 2008 3:26 pm
Re: Air tool racks cut and bent
Good point. Will see what we can do about the audio on mp4 video posts.
-
- 2 Star Member
- Posts: 78
- Joined: Tue Jul 22, 2008 3:26 pm
Re: Air tool racks cut and bent
Ok, by default the audio should be muted now and you can turn it on by clicking the volume icon if you wish.
Appreciate the suggestions for improvements. If for some reason some of you are still hearing audio by default please let us know.
Appreciate the suggestions for improvements. If for some reason some of you are still hearing audio by default please let us know.
- tinspark
- 3.5 Star Elite Contributing Member
- Posts: 702
- Joined: Wed May 30, 2018 4:28 pm
Re: Air tool racks cut and bent
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
-
- 2.5 Star Elite Contributing Member
- Posts: 185
- Joined: Tue Aug 30, 2022 9:34 am
Re: Air tool racks cut and bent
Nice clean cuts in that aluminum! Looks great, I need to make some of those and get organized around here!
DIY 4x8 table
Powermax 65
Powermax 65
-
- 2 Star Member
- Posts: 64
- Joined: Sat Apr 30, 2022 6:25 pm
Re: Air tool racks cut and bent
What grade aluminum are you using?
- Deuling Design
- 1 Star Member
- Posts: 11
- Joined: Mon Apr 01, 2024 2:32 pm
Re: Air tool racks cut and bent
Not even sure, the cheapest aluminum sheet available. They called it utility grade but it must have a specific alloy number I just don't know what that is.