Sprocket Generator

[Searchman]

Here is a free site where you can enter parameters for a sprocket and it will generate a DXF cut file.


http://www.idleamusements.com/?page_id=54

[adbuch]

Here is a free site where you can enter parameters for a sprocket and it will generate a DXF cut file.


http://www.idleamusements.com/?page_id=54

[kicktillmonday]

I was looking for something like this not long ago and couldn't find anything. Appreciate the link, will save for the future, I am sure I will need again.

[Joe Jones]

Hmmm ... It is interesting, but it lacks ... something.

Here is the same sprocket, drawn in both SPROCKETEER and DesignEDGE

Joe

TWO SPROCKETS JPG.jpg

SPROCKETEER WINDOW JPG.jpg

DE SPROCKET WINDOW JPG.jpg

[Joe Jones]

Given that the chain would roll over the SPROCKETEER sprocket equally well, the pointed teeth are not really an issue.

This is another program that might be helpful.

https://www.emachineshop.com/free-download/

Joe

[Joe Jones]

This is one that I use now and then ...

https://geargenerator.com/#200,200,100, ... 0,0,3,-515

Joe

[Joe Jones]

Yet another great site for experimentation...

https://www.stlgears.com/

Joe

[Joe Jones]

and one of my FAVORITE sites ...

https://woodgears.ca/gear_cutting/template.html

Joe

[weldguy]

Great links Joe, thanks!