The other two tables will become a test unit to make a folding 4x8 table. I want it to fold up like a ping pong table, that can be rolled to the corner of a shop when not needed.
Joe
The other two tables will become a test unit to make a folding 4x8 table. I want it to fold up like a ping pong table, that can be rolled to the corner of a shop when not needed.
Just think about how easy it’s going to be to cut pipe! You lower the deck down, insert the two roller assemblies provided by Plasmacam, lay the pipe on top of the rollers, move the gantry so that the torch is centered over the pipe and lock the gantry into place. All that is necessary at that point is an additional gantry motor with a belt mounted off to one side to rotate the pipe.
Yes, and I cannot believe how heavy it is!