I am recieving a grant for around 45-50k, I want to know what table I should go with? I currently have a 5x10 plasma cam and it was ok and i did like the software but i want something a little more industrial. My welding supplier quoted me a Trident 5x10 with a powermax 105. So, thoughts on Trident tables/software as well as anything else.
Thanks!
SUGGESTIONS ON CNC PLASMA TABLES
-
- 1/2 Star Member
- Posts: 1
- Joined: Thu Dec 03, 2015 12:57 pm
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 2021
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: SUGGESTIONS ON CNC PLASMA TABLES
Bulltear tables are built like a tank, and they precisely machine everything.
What table manufacturer does this?
viewtopic.php?t=36465
What table manufacturer does this?
viewtopic.php?t=36465
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 3.5 Star Member
- Posts: 601
- Joined: Thu Dec 05, 2019 11:33 am
Re: SUGGESTIONS ON CNC PLASMA TABLES
No one else that I know of. Pretty impressive to say the least and shows their commitment to a quality build. Wish I had one.djreiswig wrote: ↑Wed Mar 06, 2024 9:47 pm Bulltear tables are built like a tank, and they precisely machine everything.
What table manufacturer does this?
https://www.plasmaspider.com/viewtopic.php?t=36465
Tracker CNC 4x4
Hypertherm 85
Hypertherm 85