Hello all,
I was wondering if anyone has the files for the side skirts for the Samson 5x10 so I can build a down draft table? I primarily use this table for the local FFA kids to make projects on. In Montana the winters are too cold to have my shop doors open. If I need to buy them I’m open to that also. Thank you in advance, and any help in this matter would be greatly appreciated.
Josh
5x10 Samson down draft side panels
-
- 1 Star Member
- Posts: 14
- Joined: Wed Sep 20, 2023 9:24 pm
- Location: Montana
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1186
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: 5x10 Samson down draft side panels
You should have it already -use the file explorer to open the ProgramFiles(x86) directory on your hard drive. Go to the PlasmaCAM folder and then Examples. You should see the basic side panels there that you can cut. There are 3 panels in the file, you cut them all twice and it makes a set.
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
-
- 1 Star Member
- Posts: 14
- Joined: Wed Sep 20, 2023 9:24 pm
- Location: Montana
Re: 5x10 Samson down draft side panels
Thank you sir I will give it a try.
Josh
Josh
-
- 1 Star Member
- Posts: 14
- Joined: Wed Sep 20, 2023 9:24 pm
- Location: Montana
Re: 5x10 Samson down draft side panels
Robert I looked and I do not have that file, is there anyway you could help me?
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1186
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: 5x10 Samson down draft side panels
Weird. Here ya go!
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.