NC Files

[johantabbrink@gmail.com]

Good Day
I have some NC files for Plasma and Router Cut profiles.
Would like to import and save as DXF profiles

Thanks
Johan

[kicktillmonday]

Good day Johan, give this tool a try https://www.scorchworks.com/Gcoderipper ... ipper.html it has worked well for me in the past. Let us know if it works for you

[acourtjester]

That may be interesting as you want to go backward in the process. I see a possible problem as the NC file creation will introduce optional components in the file. Like different g-code elements or functions that are not in a TAP file. I am not saying it cannot be done but will these things effect the end produce, ie the DXF file not being dimensionally correct. I would do some testing with a known DXF file run through a program to generate a NC file and the through the reverse process to check its results. There controller software the will except either type of file and work fine.

[adbuch]

I have use this in the past with fine results.

G-Code Ripper 6.jpg (64.84 KiB) Viewed 3465 times

G-Code Ripper 6.jpg (64.84 KiB) Viewed 3465 times

G-Code Ripper 8.jpg[/attachment ][attachment=1]G-Code Ripper 9.jpg

[adbuch]

1001 usa 20 ipm2 .nc.dxf

(19.78 KiB) Downloaded 9 times

1001 usa 20 ipm2 .nc.dxf

(19.78 KiB) Downloaded 9 times

1001 usa 20 ipm2 ripped.dxf

(250.05 KiB) Downloaded 9 times

1001 usa 20 ipm2 ripped.dxf

(250.05 KiB) Downloaded 9 times

drawing.dxf

(2.38 MiB) Downloaded 7 times

drawing.dxf

(2.38 MiB) Downloaded 7 times

G-Code Ripper project.dxf

(24.11 KiB) Downloaded 6 times

G-Code Ripper project.dxf

(24.11 KiB) Downloaded 6 times