Offering up my Plasmacam Samson 5x10 with Designedge and Advanced Design, Advanced Height Control, Advanced Machine Control, Metric Units. Includes Hypertherm powermax 1000 with duramax machine torch, magnetic snap N cut holder and PC.
Has been upgraded to easier replaceable slats (can still use original type if desired)
Table has a new carriage assembly with less than 5 sheets of steel cut since it was replaced.
Asking $12000 obo picked up in Cedartown, Georgia
Also have a Midwest fasteners sureshot-II stud welder for an additional $2000
Would entertain a trade for an equal value side x side or ATV or trade+cash
Call or text 678-773 forty four 50
Plasmacam Samson 5x10 and hypertherm 1000
-
Casaba
- 2 Star Member
- Posts: 79
- Joined: Sun Jan 13, 2019 3:36 pm
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3428
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Plasmacam Samson 5x10 and hypertherm 1000
Sounds like a fair price. I hope you sell it!
Joe
Joe
Plasma:
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
-
Casaba
- 2 Star Member
- Posts: 79
- Joined: Sun Jan 13, 2019 3:36 pm
Re: Plasmacam Samson 5x10 and hypertherm 1000
I've been leaning heavily to trading my table for a DHC2 4x4 plus cash (varies depending on the DHC2 software levels) so I can maintain the ability but downsize my space requirements. If interested let me know
Be aware that if you have an extra seat like I do you will lose it. I would prefer a DHC2 still running 3.11 before March 11, 2011 so it is still eligible to be upgraded to the advanced designedge and extra seat like I have now.
Be aware that if you have an extra seat like I do you will lose it. I would prefer a DHC2 still running 3.11 before March 11, 2011 so it is still eligible to be upgraded to the advanced designedge and extra seat like I have now.
