Hello

New to PlasmaSpider? Introduce yourself to the community and tell us a little about you.
Post Reply
sledtrash
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Jan 23, 2024 12:31 am

Hello

Post by sledtrash »

Names Dustin, been using a Sampson table for going on 18 years at the hvac shop I used to work at. With a Victor cut master 52. Just bought my own off of auction, a torchmate not sure what yet, but it has a custom made water table under it. It came with a power max 85, but for some reason they wouldn’t send the control box with it. Maybe they had upgraded to a fancy one to use on their new table? Any way coming here for info on getting this going.
sonbakler
3 Star Member
3 Star Member
Posts: 366
Joined: Fri Apr 15, 2011 3:47 am

Re: Hello

Post by sonbakler »

Welcome Dustin. Hopefully you can get it going without much trouble. So you have no control electronics? Curious what your looking at doing, I know C&CNC has a package specific to replacing the Torchmate electronics. May be worth looking into. Best of luck
Post Reply

Return to “Introduce Yourself”