took this campfire scene and traced it using logic trace and cutting it out
with a CO2 laser and painted it black
Also this could be cut on plasma
https://stankern.vids.io/videos/ea9fd4b ... and-traced
relaxing campfire scene printed and traced
-
- 2 Star Member
- Posts: 94
- Joined: Fri May 12, 2017 12:02 pm
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8134
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: relaxing campfire scene printed and traced
Nice work and room for a Family name at the bottom too. Post the DXF or SVG file if you want, some member may want to cut one out.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: relaxing campfire scene printed and traced
Nice video Stan! Your newer version of Logictrace is much more colorful than my older version. I have become so spoiled doing manual tracing on the computer that it is hard for me to go back to the digitizing board unless absolutely necessary. But you've got your process down and dialed in so you are very fast and efficient with it. Keep up the great work.
David
David
-
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: relaxing campfire scene printed and traced
Tom - I've seen similar versions offered as a finished pieces on Etsy. But I don't think I have seen the actual dxf or svg offered anywhere. I might try my hand at a manual trace of the image.acourtjester wrote: ↑Sat Aug 26, 2023 4:13 pm Nice work and room for a Family name at the bottom too. Post the DXF or SVG file if you want, some member may want to cut one out.
David
-
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: relaxing campfire scene printed and traced
I didn't have the patience to spend the time to do a manual trace, so I opted for an Inkscape autotrace instead. For low resolution images, the autotrace often turns out a bit distorted - but I think this one came out ok.
David
David
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8134
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: relaxing campfire scene printed and traced
Nice work, and thanks for posting the file
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 5 Star Elite Contributing Member
- Posts: 2713
- Joined: Thu Jul 24, 2008 11:15 am
Re: relaxing campfire scene printed and traced
Nice David, super clean design. All of Stans posts are great but the designs he does on his drawing boards are never shared, seems more like a promotion for the drawing boards he uses.
-
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: relaxing campfire scene printed and traced
Plasmamewbie - Stan has a close relationship with John Walsh - the guy who sells the LogicTrace program and digitizing boards. I think Stan just does this for fun as a hobby, and am not quite sure why he never shares his files.plasmanewbie wrote: ↑Mon Aug 28, 2023 12:21 pm Nice David, super clean design. All of Stans posts are great but the designs he does on his drawing boards are never shared, seems more like a promotion for the drawing boards he uses.
David
- tinspark
- 3.5 Star Elite Contributing Member
- Posts: 702
- Joined: Wed May 30, 2018 4:28 pm
Re: relaxing campfire scene printed and traced
Very nice!adbuch wrote: ↑Sun Aug 27, 2023 1:08 am I didn't have the patience to spend the time to do a manual trace, so I opted for an Inkscape autotrace instead. For low resolution images, the autotrace often turns out a bit distorted - but I think this one came out ok.
David
Campfire Scene.svg image.jpg
Campfire Scene.svg
Definitely worthy of an archive save for potential future use
Thanks David
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
- tinspark
- 3.5 Star Elite Contributing Member
- Posts: 702
- Joined: Wed May 30, 2018 4:28 pm
Re: relaxing campfire scene printed and traced
I kinda sensed that too. But hey, capitalism baby!plasmanewbie wrote: ↑Mon Aug 28, 2023 12:21 pm “ seems more like a promotion for the drawing boards he uses’.
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"