Years ago (2010) I hardwired my HP PM65 to our new Samson table. Since we've closed the business, I now would like to change it to use a plug so I can quickly separate it from the table. Problem is I can't find my original wiring diagram AND my old brain doesn't work the way it used to. Would anybody have a diagram of how the new plug needs to be wired? I thought that it might just be simpler to put in a four pin plug where it goes in at the bottom of the unit. I know this is easy peasy for a lot of folks but unfortunately, not for this bumpkin. Opinions?
Allen
Looking for a schematic.
-
- 4 Star Elite Contributing Member
- Posts: 805
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Looking for a schematic.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3428
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Looking for a schematic.
Robert Johnson can answer this question.
Joe
Joe
Plasma:
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades
Lasers:
X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
3D Printers:
CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
Why pay off debt when you can die owning MILLIONS?
FREE DesignEdge Training Online Via ZOOM!
- SegoMan DeSigns
- 4 Star Member
- Posts: 952
- Joined: Sat Jan 06, 2018 4:45 pm
Re: Looking for a schematic.
Here is the download section for the 65, I would save them all to disk for future use:
https://www.hypertherm.com/en-US/resour ... ish%20(US)
https://www.hypertherm.com/en-US/resour ... ish%20(US)