While building my home shop this past summer I was stressing out about setting my 6x8 pressure treated posts ranging in length 22-30’
I had a mini excavator and auger to drill the holes so… I came up with this
using 2) 2” ratchet straps to attach I was able to set all 18 posts by my self
It’s nice having access to a CNC plasma!
Not sure if it would be OSHA approved! But it worked great for me!!
Thought I’d share
Post handle-er thing
-
- 2.5 Star Member
- Posts: 166
- Joined: Mon Sep 12, 2022 9:29 am
Re: Post handle-er thing
Fantastic idea.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8134
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Post handle-er thing
Ah yes DIY at it finest
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1688
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Post handle-er thing
I lover finding solutions to problems.
Nice job!
Nice job!
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2.5 Star Elite Contributing Member
- Posts: 213
- Joined: Mon May 07, 2018 5:27 pm
- Location: Moose Jaw Sask.
Re: Post handle-er thing
That's what's nice about owning a cnc table, you can build or make stuff work in just about any situation, your imagination is the limit.
Good job Kars.
Good job Kars.
-
- 3.5 Star Member
- Posts: 601
- Joined: Thu Dec 05, 2019 11:33 am
-
- 3 Star Member
- Posts: 451
- Joined: Thu Jul 11, 2013 8:46 pm
- Location: NEW MEXICO
Re: Post handle-er thing
Necessity, the mother of invention.
Very nice.
Very nice.