Gristone and lighting
- cstroke
- 3 Star Elite Contributing Member
- Posts: 406
- Joined: Thu May 24, 2012 7:45 pm
Gristone and lighting
Parts are attached with 1/4" stainless cap screws from back drilled and tapped.
Band rolled on back with mounting brackets.
Powdercoated with a white that has other colors in it. greens etc.. sort of marbled.
I still have to backlight the letters.
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
-
- 3 Star Member
- Posts: 404
- Joined: Tue Sep 30, 2008 3:40 pm
Re: Gristone and lighting
Awesome work! Wow, and that lamp idea! Very well done, thanks for posting the pics.
- WyoGreen
- 4 Star Member
- Posts: 897
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
Re: Gristone and lighting
Clever lights, the whole look comes out nice.
Steve
Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 2021
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Gristone and lighting
That sign looks awesome.
Should you be using waterproof electrical boxes for those lights since it's outdoors? I would think the slots in the covers would allow moisture in.
Should you be using waterproof electrical boxes for those lights since it's outdoors? I would think the slots in the covers would allow moisture in.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2626
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Gristone and lighting
Looks very nice! Thanks for posting the pictures.
Larry
Larry
- cstroke
- 3 Star Elite Contributing Member
- Posts: 406
- Joined: Thu May 24, 2012 7:45 pm
Re: Gristone and lighting
I don't disagree on the boxes, the owner installed so I don't have much say LOL...
The lights I posted a pic a while ago. I beat them with a hammer then flat clear coated, spots I hit with a torch to discolor a bit.
The pulley for the lights matches the pic of the chandelier I made for them.
They have a big chandelier and 2 lights, 2nd smaller chandelier for a table should be getting installed this week, hoping I get a pic of it soon.
Thanks for the replies..
Chris
The lights I posted a pic a while ago. I beat them with a hammer then flat clear coated, spots I hit with a torch to discolor a bit.
The pulley for the lights matches the pic of the chandelier I made for them.
They have a big chandelier and 2 lights, 2nd smaller chandelier for a table should be getting installed this week, hoping I get a pic of it soon.
Thanks for the replies..
Chris
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
-
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Gristone and lighting
Chris - very nicely done!! It looks great!
David
David
-
- 3 Star Elite Contributing Member
- Posts: 468
- Joined: Sat Nov 11, 2017 8:57 am
- Location: Wisconsin
Re: Gristone and lighting
Great idea using the rope and pulley for lights!
Jeff
Jeff
Jeff S.
J-SIG Manufacturing
J-SIG Manufacturing